Research, teaching and innovation

Academic

From pioneering AI research to software engineering, risk management and software business.

Research in AI, Software Engineering and Software Business

My academic journey began in 1986 at Nokia Research Center, where I worked on artificial intelligence and knowledge-based systems, leading major international research initiatives and later Nokia’s software engineering research group.

From 1994 to 1996, I conducted research at the University of Maryland, collaborating with Professor Victor Basili and NASA’s Software Engineering Laboratory. My work on software risk management resulted in the Riskit method and my doctoral degree in 2001.

I served as an adjunct professor of software engineering at Helsinki University of Technology, currently Aalto University, (1997–2000), and subsequently as Professor of Software Business (2002–2007). During this period, I led the Software Business Laboratory, focusing on software engineering, business models, innovation, and the competitiveness of the software industry.

In 2007, I left academia to concentrate on entrepreneurship, consulting, and investing, continuing to bridge research and business practice.

Principal Contributions

  • Artificial intelligence and knowledge-based systems — early engineering methods for large, maintainable expert systems, including rule-base design, testing, compilation and life-cycle methods.
  • Software engineering — the OTSO method for selecting reusable/COTS components, software process modeling and improvement, requirements engineering, and rigorous empirical research methods.
  • Risk management — the Riskit method, combining structured risk scenarios, multiple stakeholder objectives, decision support and empirical validation. Deployed world-wide in dozens of organizations, including Nokia and Mercedes-Benz.
  • Software business — research connecting development capability with productization, scaling, business models, economics and management; establishment of the Software Business Laboratory.

Publications

NB: Summaries by research area written by AI. 

 

Artificial Intelligence and Knowledge-Based Systems

In the 1980s and early 1990s, Kontio worked on making knowledge-based systems reliable enough for large operational deployments. At Nokia, he helped develop expert systems for banking and insurance, including an agricultural-loan advisory system with several thousand rules that was used by approximately 200 local banks, according to his CV. His work covered structured rule-base design, knowledge acquisition, compilation and testing, as well as methodologies for maintaining knowledge-based applications over their life cycle.

He also initiated the Finnish AJ-TUKI project and played a central technical coordination role in the European ESPRIT VITAL research project on knowledge-based systems development methods and tools.

Selected publications
  • Kontio (1991). Matias: Development and Maintenance of a Large but Well-defined Application. Expert Systems with Applications.
  • Kontio (1988). Experiences from Development and Delivery of Two Large Expert Systems for Agricultural Loan Analysis. AI in Agriculture conference.
  • Kontio & Rouge (1991). The VITAL Life Cycle Model. ESPRIT VITAL research report.

 

Software Engineering and Empirical Software Engineering

Kontio’s software engineering research addressed systematic development, software reuse and evidence-based process improvement. At the University of Maryland and NASA, he developed and evaluated OTSO, an early structured approach to choosing reusable and commercial off-the-shelf software components. The method combined explicit selection criteria, comparisons of cost and added value, and empirical case studies.

Other contributions concerned process engineering, requirements engineering, project commitments and empirical methods. His work on using focus groups to study practitioner and user experiences received the Best Paper Award at ISESE 2004. The broader research program linked methodological rigor with practical use in software organizations.

Selected publications
  • Kontio (1996). A Case Study in Applying a Systematic Method for COTS Selection. ICSE.  [PDF]
  • Kontio (1998). A Software Process Engineering Framework. Advances in Computers.  [Publisher]
  • Kauppinen et al. (2004). Implementing Requirements Engineering Processes throughout Organizations. Information and Software Technology.  [Full-text page]
  • Kontio, Lehtola & Bragge (2004). Using the Focus Group Method in Software Engineering. ISESE. Best Paper Award.  [PDF]
  • Kontio, Bragge & Lehtola (2007). The Focus Group Method as an Empirical Tool in Software Engineering. Guide to Advanced Empirical Software Engineering.  [Publisher]

 

Risk Management

Kontio developed the Riskit method for the systematic identification, analysis and management of software-development risks. Rather than relying solely on estimated probabilities and financial losses, Riskit models risk scenarios explicitly and examines their consequences for different objectives and stakeholders. The research also addressed risk knowledge capture, process improvement and empirically grounded evaluation of the method.

Developed during work connected with the University of Maryland and NASA, Riskit was tested in industrial settings and formed the basis of Kontio’s doctoral dissertation, approved with distinction in 2001. The research later provided a foundation for solutions developed by R & D-Ware Oy.

Selected publications
  • Kontio (2001). Software Engineering Risk Management: A Method, Improvement Framework, and Empirical Evaluation. Doctoral dissertation.  [PDF]
  • Kontio & Basili (1997). Empirical Evaluation of a Risk Management Method. SEI Conference.  [PDF]
  • Kontio, Getto & Landes (1998). Experiences in Improving Risk Management Processes Using the Concepts of the Riskit Method. FSE-6.  [PDF]
  • Freimut et al. (2001). An Industrial Case Study of Implementing Software Risk Management. ESEC/FSE.  [Full-text page]
  • Kontio, Jokinen & Rosendahl (2004). Visualizing and Formalizing Risk Information: An Experiment. METRICS.  [Publisher record]

 

Software Business

As Professor of Software Product Business at Helsinki University of Technology (2002–2007), Kontio established and led the Software Business Laboratory. Research in the laboratory connected software engineering with economics, organizational capabilities and business strategy. Topics included software productization, scalability, business models, industry structure, international competitiveness and the business knowledge required of software engineers.

National software-industry surveys provided empirical evidence about the development and challenges of Finnish software product companies. This research helped bridge the often-separated worlds of engineering practice, management and entrepreneurship.

Selected publications
  • Mäkelä, Oza & Kontio (2009). Dynamic Capabilities in the Software Process. International Journal of Information Technology and Management.  [Publisher]
  • Kontio et al. (2006). Software Business Education for Software Engineers: Towards an Integrated Curriculum. CSEE&T.  [Full-text page]
  • Ahokas et al. (2005). Effects of Software Engineering Practices on the Scalability of Firms’ Software Development Output. ISESE.
  • Hietala et al. (2004). Challenges of Software Product Companies: Results of a National Survey in Finland. METRICS.  [PDF]

 

 

Publication list

See the full bibliography below, organized by research area and publication type. The entries link to an openly hosted PDF where one was located, or otherwise to a record or full-text page when useful.

Refereed publications

  • Kontio, J. (1991). Matias: Development and Maintenance of a Large but Well-defined Application. Expert Systems with Applications, Vol. 3.
  • Kontio, J. (1988). Experiences from Development and Delivery of Two Large Expert Systems for Agricultural Loan Analysis. AI in Agriculture, Food Processing and Agrochemical Industries, Caen, France.

Other research papers and reports

  • Kontio, J. & Rouge, A. (1991). The VITAL Life Cycle Model. ESPRIT VITAL (P5365), Deliverable DD111.
  • Kontio, J. & Lounamaa, P. (1989). Graphical Framework for Knowledge Acquisition and Representation (revised version). Third European Workshop on Knowledge Acquisition for Knowledge-Based Systems.
  • Kontio, J. (1988). Compilation as an Alternative to Interpreting Inference Engine. Finnish AI Conference.
  • Kontio, J., Nyyssönen, K. & Rauhala, O. (1988). Practical Approaches to Testing of Rule-Based Systems. Finnish AI Conference.

Refereed publications

  • Kontio, J., Bragge, J. & Lehtola, L. (2007). The Focus Group Method as an Empirical Tool in Software Engineering. In Guide to Advanced Empirical Software Engineering, Springer, pp. 93–116. [ Publisher ]
  • Kauppinen, M., Vartiainen, M., Kontio, J., Kujala, S. & Sulonen, R. (2004). Implementing Requirements Engineering Processes throughout Organizations: Success Factors and Challenges. Information and Software Technology, 46(14), 937–953. [ Full-text page ]
  • Kontio, J., Lehtola, L. & Bragge, J. (2004). Using the Focus Group Method in Software Engineering: Obtaining Practitioner and User Experiences. ISESE. Best Paper Award. [ PDF ]
  • Kontio, J. (1998). A Software Process Engineering Framework. Advances in Computers, Vol. 46, pp. 35–108. [ Publisher ]
  • Kontio, J., Pitkänen, O. & Sulonen, R. (1998). Towards Better Software Projects and Contracts: Commitment Specifications in Software Development Projects. ICSE, pp. 486–489. [ DOI ]
  • Kontio, J., Caldiera, G. & Basili, V. R. (1996). Defining Factors, Goals and Criteria for Reusable Component Evaluation. CASCON ’96. [ PDF ]
  • Kontio, J. (1996). A Case Study in Applying a Systematic Method for COTS Selection. 18th International Conference on Software Engineering. [ PDF ]

Other papers and technical reports

  • Kontio, J. (2002). Challenges in Scaling Up Agile Software Development Process for Real Business. First ICSE Workshop on Iterative, Adaptive and Agile Processes.
  • Kontio, J. (1998). A Brief Introduction to Experience Factory and Quality Improvement Paradigm. Finnish Quality Conference.
  • Condon, S., Kraft, S., Basili, V. R., Seaman, C., Kontio, J. & Kim, Y. (1996). Evolving the Reuse Process. NASA 21st Software Engineering Workshop.
  • Kontio, J., Chen, S.-F., Limperos, K., Tesoriero, R., Caldiera, G. & Deutsch, M. (1995). A COTS Selection Method and Experiences of Its Use. 20th NASA Software Engineering Workshop. [ Proceedings PDF ]
  • Kontio, J. (1995). OTSO: A Systematic Process for Reusable Software Component Selection. University of Maryland Technical Report CS-TR-3478.
  • Kontio, J. & Chen, S.-F. (1995). Hypertext Document Viewing Tool Trade Study: Summary of Evaluation Results. Hughes Corporation ECS Technical Paper.
  • Kontio, J. (1994). Software Process Modeling: A Technology Review and Notation Analysis. Nokia Research Center Technical Report.

Theses and edited volumes

  • Kontio, J. (1995). Promises: A Framework for Utilizing Process Models in Process Asset Management. Licentiate thesis, Helsinki University of Technology.
  • Kontio, J. & Conradi, R. (Eds.) (2002). Quality Connection: 7th European Conference on Software Quality — Proceedings. Springer-Verlag.
  • Kontio, J. & Conradi, R. (Eds.) (2002). Software Quality — ECSQ 2002: Conference Notes. Center for Excellence Finland.

Refereed publications

  • Kontio, J., Jokinen, J.-P. & Rosendahl, E. (2004). Visualizing and Formalizing Risk Information: An Experiment. METRICS 2004, pp. 196–206. [ Publisher record ]
  • Freimut, B., Hartkopf, S., Kaiser, P., Kontio, J. & Kobitzsch, W. (2001). An Industrial Case Study of Implementing Software Risk Management. European Software Engineering Conference. [ Full-text page ]
  • Kontio, J., Getto, G. & Landes, D. (1998). Experiences in Improving Risk Management Processes Using the Concepts of the Riskit Method. FSE-6, pp. 163–174. [ PDF ]
  • Kontio, J. & Basili, V. R. (1997). Empirical Evaluation of a Risk Management Method. SEI Conference on Risk Management. [ PDF ]

Other research papers and reports

  • Kontio, J. (2002). Applying Modern Decision Making Theories to Assess Risks and Stakeholder Value in Software Development. Fourth EDSER Workshop.
  • Kontio, J. (2002). Risk Management: What Went Wrong and What Is the New Agenda? ECSQ 2002 Conference Notes.
  • Kontio, J. (1997). The Riskit Method for Software Risk Management, Version 1.00. University of Maryland Technical Report CS-TR-3782. [ Research record ]
  • Kontio, J. & Basili, V. R. (1996). Risk Knowledge Capture in the Riskit Method. 21st NASA Software Engineering Workshop. [ PDF ]
  • Kontio, J., Englund, H. & Basili, V. R. (1996). Experiences from an Exploratory Case Study with a Software Risk Management Method. University of Maryland Technical Report CS-TR-3705. [ Repository / PDF ]
  • Kontio, J. (1994). Software Engineering Risk Management: A Technology Review Report. Nokia Research Center Technical Report.

Doctoral dissertation

  • Kontio, J. (2001). Software Engineering Risk Management: A Method, Improvement Framework, and Empirical Evaluation. Doctoral dissertation, Helsinki University of Technology. ISBN 952-5136-22-1. [ PDF ]

Refereed publications

  • Mäkelä, M. M., Oza, N. V. & Kontio, J. (2009). Dynamic Capabilities in the Software Process. International Journal of Information Technology and Management, 8(1), 4–18. [ Publisher ]
  • Kontio, J., Warsta, J., Mäkelä, M. M., Ahokas, M., Tyrväinen, P. & Pöyry, P. (2006). Software Business Education for Software Engineers: Towards an Integrated Curriculum. CSEE&T. [ Full-text page ]
  • Ahokas, M., Kontio, J., Mäkelä, M. M., Pöyry, P. & Lassila, A. (2005). Effects of Software Engineering Practices on the Scalability of Firms’ Software Development Output. ISESE.
  • Hietala, J., Kontio, J., Jokinen, J.-P. & Pyysiäinen, J. (2004). Challenges of Software Product Companies: Results of a National Survey in Finland. METRICS, pp. 232–243. [ PDF ]

Other papers

  • Kontio, J., Jokinen, J.-P., Mäkelä, M. M. & Leino, V. (2005). Current Practices and Research Opportunities in Software Business Models. EDSER-7. [ DOI ]
  • Hietala, J. & Kontio, J. (2003). Productization: A Challenge to the Finnish Software Product Companies. Economic Trends, No. 5.
  • Kontio, J. & Calavaro, G. (1997). Towards Integrating Software Technology and Competitive Strategies. PICMET ’97.

Books, surveys and edited volumes

  • Kontio, J. (Ed.) (2008). Kasvufoorumi 08 loppuraportti. Ohjelmistoyrittäjät ry.
  • Niinikoski, M.-L., Valovirta, V. & Kontio, J. (2006). Global Software -ohjelman arviointi. KTM Julkaisuja, ISBN 951-739-970-7.
  • Jokinen, J.-P., Hietala, J., Mäkelä, M. M., Huurinainen, P., Maula, M., Kontio, J. & Autio, E. (2005). Finnish Software Product Business: Results from the National Software Industry Survey 2004. Tekes.
  • Kuitunen, H., Jokinen, J.-P., Lassila, A., Mäkelä, M. M., Huurinainen, P., Maula, M., Ahokas, M. & Kontio, J. (2005). Finnish Software Product Business: Results from the National Software Industry Survey 2005. Centre of Expertise for Software Product Business. [ Full-text page ]
  • Kontio, J., Cusumano, M. A., Erdogmus, H. & Raffo, D. (Eds.) (2004). Proceedings of the Economics-Driven Software Engineering Workshop (EDSER-6).
  • Kontio, J. & Butler, S. (Eds.) (2003). Proceedings of the Economics-Driven Software Engineering Workshop (EDSER-5). IEEE Computer Society.

Let’s connect.